FULL FORCE® Conventional Green Concentrate Antifreeze + Coolant

Part #FFA0B3

A universal low-silicate antifreeze + Coolant that meets or exceeds all ASTM and SAE performance standards.

Technical Documentation:

Product Description

FULL FORCE® Conventional Green Antifreeze + Coolant is the low-silicate formulation for use in older cars and light to medium-duty truck applications, as well as heavy-duty diesel engines with the use of supplemental coolant additives (SCAs). With a complete cooling system flush and fill, it will provide rust and corrosion protection to all cooling system metals for up to 2 years/50,000 miles*, and is compatible with all other conventional low-silicate formulations.

FULL FORCE® Conventional Green Antifreeze + Coolant is designed for use

in older passenger cars, light/ medium and heavy-duty trucks including‡:

• Chrysler: All Pre-2000 • Ford: All Pre-2002 • GM: All Pre-1995

*Protects all cooling system metals for up to 2 years/50,000 miles when a complete cooling system

flush and fill is performed, and proper cooling system maintenance is followed. Always follow

vehicle owner’s manual for top-off requirements, change intervals, and specified maintenance.

‡With the addition of SCA.

Features & Benefits:
  • Meets Heavy-Duty Engine Low Silicate Requirements
  • The formula protects all cooling system metals for up to 2 years/50,000 miles with the addition of SCAs
  • Maximum freeze-up protection to -84°F boilover protection to +276°F *
  • Provides year-round protection against damaging rust and corrosion
  • Compatible with all conventional green antifreeze
  • Meets or exceeds ASTM D3306, D4985 and D6210 specifications

Specifications, Applications and Product Details

  • FULL FORCE® Conventional Green Antifreeze + Coolant is designed for use
    in older passenger cars, light/ medium and heavy-duty trucks including‡:
    • Chrysler: All Pre-2000 • Ford: All Pre-2002 • GM: All Pre-1995
    Also recommended for use where the following are cited:
    • ASTM D3306 • ASTM D4985 • ASTM D6210 after addition of SCA
  • Properties
    Ash content: <5 [mass %]
    Boiling Point (15 psig) 50/50 Mixture ˚C: 129 °C
    Boiling Point (15 psig) 50/50 Mixture ˚F: 265 °F
    Boiling Point (15 psig) 60/40 Mixture ˚C: 132 °C
    Boiling Point (15 psig) 60/40 Mixture ˚F: 270 °F
    Boiling point (unpressurized ) ˚C: 162.6 °C
    Boiling point (unpressurized) ˚F: 325 °F
    Chloride, ppm: <25 ppm
    Coolant Appearance: Green
    Effect on Automotive Finish: No Effect
    Freezing Point (15 psig) 50/50 Mixture ˚C: -36 °C
    Freezing Point (15 psig) 50/50 Mixture ˚F: -34 °F
    Freezing Point (15 psig) 60/40 Mixture ˚C: -52 °C
    Freezing Point (15 psig) 60/40 Mixture ˚F: -62 °F
    pH (50% vol): 10.5 pH
    Specific gravity: 1.122
    Total water: <5 [mass %]